A couple of 2x4s nailed probably not the best example of a joint wood, but the fact is that two pieces of wood assembled in a way can be called at any woodworking woodworking. The decision on which type of joint for a project can be a bit 'of confusion, its use, though. We begin with a look at what really matters: Strength and style.
Resistance is probably the most important factor when one considers that a municipality has usually means a broken cabinet.Style plays a second, of course, for the simple reason that we want to be attractive for our work. And we are more worried about how a project, in general, the more we try to be seen by hiding the carpenters'. Go ahead and look at specific types of projects that build, and the most suitable for this type of carpentry project.
Benches and tables Shop
We're not talking about building fine furniture here, so that means we canAfter a rather rough wood, which offers the combined strength of style. Lap joints and half lap joints are a good choice here. Like the word "round" means to create a simple board laps over the other for the Union. How do you decide to connect the two parts is up to you, but even the simplest hardware (such as nails) receive a strong bond.
Boxes and containers
Carpentry for this type of project can be a bit 'more complicated. Of course we want to force a largePart of the equation, but certainly the appearance and style will be equally important. Complicating matters is that the wood used for boxes of cabinets and tables is usually thinner than the bulky 2x4s we use for things like benches and picnic. This means working less sticky, and can no longer opportunities for the municipality. To counter these problems, cases and cabinets are usually made with a combination of styles, joinery, as nut grooves and joints. ThisThe joints are designed to interlock the edges of the table. That in itself adds considerable force, but real advantage they offer is non-adhesive surface per square inch, something that would not otherwise get from just two flat surfaces being together.
Cabinet Body
The joints of wood most commonly used for the basic shape of a cabinet to hold together (top, sides, rear) are nut grooves and joints. As I said earlier, the sticky surface provided by these extraTypes of joints goes a long way in maintaining the internal structure of the project as possible. You can always strengthen cooperation with wood screws to hide, but most workers prefer to attack wood and clamp the pieces and not worry about trying to connect the holes with wood.
Woodworking Wood Joints
Face Frames
The purpose of frames the face (sometimes called Stiles and rails) is to cover the exposed carcass joinery furniture. It 's a really great way to dressa project, especially when using cheap materials (like plywood) for the construction of housing unit. Most woodworkers choose between two different joints of wood to make frames the face, half lap joints and / or mortise and tenon joints.
Cabinet Doors
doors are essentially frames the face with a panel inside. Building can be a bit 'difficult, as you must cut a sort of groove along the inner edge of the panel to hold it in place. The easiest to use portsstub tenons and grooves that cut relatively easy if you can find your way with a circular saw. Note that the doors with glass panels or slabs floating probably need a strong policy as a mortise and tenon joint.
Drawers
By far the most complicated (and important) type of lathe is necessary to take in the drawers. And for good reason. Drawers get pushed, pulled, and put extreme stress test every day. This type of penalty callscarpentry super-strong only so for more than a few weeks. Therefore, the dovetail joints are so common. It works just can not get more than anyone else. Not everyone is prepared to do, then there are some alternatives - such as language and joints Dado joints or joint locks. Both have a good job, a strong bond between the sides and front of the tray.
No comments:
Post a Comment